Product Consultation
Your email address will not be published. Required fields are marked *
Ensuring that the shower tray you choose is both beautiful and has sufficient anti-slip effect involves many factors, including material selection, surface treatment, design, installation method, etc. Here are some specific suggestions to help you find a balance between beauty and anti-slip performance:
1. Choose the right material
Different materials determine the beauty, durability and anti-slip performance of the shower tray. Common materials are:
Acrylic: Smooth and easy to clean, with a stylish appearance. Although the anti-slip performance of acrylic trays is average, many acrylic trays will improve their anti-slip performance by coating the surface or adding an anti-slip layer.
Recommendation: Choose acrylic trays with anti-slip coatings or built-in anti-slip textures.
Quartz: Trays made of quartz often have an elegant appearance and a relatively strong and durable surface. Quartz naturally has a certain anti-slip performance, especially frosted or granular surfaces.
Recommendation: Choose quartz trays with frosted surfaces or rough textures, which can effectively increase the anti-slip effect.
Ceramic: Traditional ceramic trays are durable but may not be as good at preventing slipping. Modern ceramic trays are usually treated with special surface treatments, such as anti-slip glaze, to improve the anti-slip effect.
Recommended: Choose ceramic trays with anti-slip coatings, especially in ceramic trays with smooth appearance.
Composite: Composite trays are usually made of a mixture of materials such as quartz and polymers, with a smooth surface but strong. Many composite trays have been designed with anti-slip properties in mind, often with built-in textures or special anti-slip coatings to improve the anti-slip effect.
Recommended: Choose composite trays with coarse textures and anti-slip treatment on the surface.
Natural Stone: Shower trays made of natural stone such as marble and granite have natural beauty and uniqueness. The stone itself may have a certain anti-slip effect, but you need to pay attention to the surface treatment.
Recommended: Choose natural stone trays that have been treated with anti-slip surface treatment, or use anti-slip mats or anti-slip films when installing.
2. Surface treatment and anti-slip design
The anti-slip effect depends not only on the material, but also on the surface design and treatment process of the tray.
Anti-slip coating: Many shower trays are coated with special anti-slip coatings, which can provide additional friction and prevent slipping. You can choose trays with anti-slip coating on the surface, which can enhance safety while maintaining beauty.
Surface texture: Some trays increase friction through engraving, concave and convex design or frosting, thereby enhancing anti-slip properties. For example, the surface has a fine concave and convex structure, which can effectively increase the friction between the foot and the tray.
Recommended: Choose trays with fine concave and convex textures or rough frosted surfaces, which usually have stronger anti-slip effects.
Integrated anti-slip design: Some high-end shower trays use integrated anti-slip design, which means that the anti-slip effect is not just the coating or texture, but also takes into account the overall structural design of the tray, so that it can effectively prevent slipping during actual use.
3. Choose an edge design with strong anti-slip properties
The edge design of the tray also affects the anti-slip properties. Generally speaking, trays with higher edges can better prevent water from splashing, while trays with lower or flat edge designs may be more likely to accumulate water, increasing the risk of slipping.
High-edge trays: The high edge design of the tray can prevent water from splashing and increase a certain anti-slip effect.
Flat-edge trays: If you choose a flat edge design, it is recommended to use an anti-slip coating or mat to improve safety.
4. Consider anti-slip mats or additional accessories
If the surface of the shower tray you choose is not anti-slip, you can use additional accessories to enhance the anti-slip property:
Anti-slip mats: You can lay anti-slip mats inside the tray. This mat is generally made of anti-slip materials such as rubber or silicone, which can effectively prevent slipping.
Anti-slip film: There are also special anti-slip films on the market that can be directly pasted on the surface of the shower tray to enhance friction and reduce the risk of slipping.
5. Choose the right installation method
Flush-to-the-ground design: This design is often called "low-drain design" or "seamless installation". It allows the shower tray to be almost flush with the bathroom floor, with a simple and beautiful appearance, while reducing water accumulation and providing a smooth anti-slip effect.
Slope design: Make sure the shower tray is designed with a reasonable slope (usually 1-2 degrees), which can help water flow smoothly into the drain, prevent water accumulation, and indirectly increase the anti-slip effect.
6. Regular maintenance and cleaning
The anti-slip effect is also affected by daily cleaning and maintenance. After long-term use, soap stains, grease or scale may accumulate on the surface of the tray, which will reduce the anti-slip performance. Therefore, regular cleaning is an important step to maintain the anti-slip effect.
Cleaning tips: Use a mild detergent to clean the surface of the tray regularly, and avoid using acidic or highly corrosive detergents to avoid damaging the anti-slip coating or surface texture.
Anti-slip coating protection: If your shower tray has an anti-slip coating, avoid using overly rough cleaning tools (such as steel wool) to avoid damaging the coating.
By considering these factors comprehensively, you can ensure that the shower tray you choose not only meets your aesthetic requirements, but also provides a safe and comfortable shower experience for your family or users.
What designs of Shower Cabins can reduce pulley wear and jamming?
In terms of comfort, how does the design and depth of a Freestanding Bathtub affect the bathing experience?
Your email address will not be published. Required fields are marked *
Keep up-to-date with what’s new at D-MAN
Keep up-to-date with what’s new at D-MAN
No.12 Fuziling Road, Nanling Economic Development Zone, Wuhu City
Tel: +86 13967167585
E-mail: [email protected]
Copyright 2023 Anhui D-MAN Smart Home Co., Ltd. All Rights Reserved Shower Enclosures Manufacturers Shower Room Design Custom